Open Master Beneficiary Registry workspace ↗Skip to main content
NSIPA — National Social Investment Programmes AgencyNSIPA
Registration & enrollment
SYNTHETIC SANDBOX • Use fictional people and households. This service does not verify NIN or issue real payments.

Ask the local knowledge assistant

NSIPA knowledge library

Task guidance for each service and workflow stage. Local guides describe NSIPA; upstream references may describe other releases. Your account determines available actions.

531 published entries across 18 services · 64 source-linked guides

Persona workspace

11 matching entries · Page 1 of 1

Configure sponsor bank routing · Programme management · all

NSIPA local workflow

Provisional guidance

Assign the approved sponsor bank route for the verified programme list.

What to do

  1. Confirm the intended programme and disbursement revision.
  2. Select the approved Sponsor bank routing entry and choose Save payment routing.
  3. Check that the saved route is reflected before the Payment role proceeds.

What you need

Use the authorised Programme Admin account and approved bank assignment. After case reopening, confirm the programme and cycle for the newly authorised list before setting its sponsor bank route.

Next step

Payment submits the verified list through the separate payment action.

Published version 2 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Sponsor bank routing · Programme management · all

NSIPA local workflow

Provisional guidance

Choose the approved sponsor bank route for the intended programme. Save the route before Payment submits the verified list. If the route is absent, ask the programme administrator to verify the approved configuration.

Published version 1 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Wait for sponsor bank routing · Programme management · all

NSIPA local workflow

Provisional guidance

The approved list needs a configured sponsor bank route before Payment can submit it.

What to do

  1. Check that the list shows Fully verified and note its programme, cycle and revision.
  2. Ask Programme Admin to configure and save the approved sponsor bank route.
  3. Refresh the same list and check when Proceed to payments becomes available.

What you need

Payment can continue once the route is configured and the list satisfies its payment validations.

Next step

Use Proceed to payments to review the approved count and total before confirming.

Published version 1 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Bank & warehouse assignments · Programme management · all

NSIPA local workflow

Provisional guidance

Inspect programme benefit fulfilment or sponsor bank routing.

What to do

  1. Open the relevant assignment and check the programme, benefit and destination.

What you need

Use the approved fulfilment or sponsor bank route.

Next step

Check the routing shown on the approved disbursement list before payment.

Published version 2 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Warehouses & banks · Programme management · all

NSIPA local workflow

Provisional guidance

Inspect fulfilment locations and sponsor bank entries.

What to do

  1. Open the relevant entry and check its type and details.

What you need

Confirm the approved sponsor bank and its assigned programme.

Next step

Use the assignment screen to verify the routing for the selected benefit.

Published version 2 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Coordinate reversal follow-up · Programme management · all

NSIPA local workflow

Provisional guidance

Connect the reported reversal to the original programme, cycle and approved list.

What to do

  1. Check the programme, cycle and revision against the submitted list and Verification history.
  2. Keep the original approved list and payment reference in the case record.
  3. Give Payment and Finance the list, envelope and batch references through the authorised follow-up process.

What you need

The submitted payment report supports refresh and download. List correction and sponsor bank routing are locked for this submission.

Next step

Coordinate supporting information for the reconciliation owner. Route any proposed corrective action through the authorised process. If this is a corrective payment that has also reversed, link both submitted lists, their revisions and both envelope and batch references in the existing case. Notify Payment and Finance that the case remains open. If the CEO authorises another payment, prepare a separate disbursement list and link it to the decision and both reversals. If the CEO closes the case, archive both submitted lists and their references with the closure record. If a reversal is recorded after case closure, request reopening under the same case reference. Link the newly reversed payment and the closure decision to the existing case. If a new payment is authorised after reopening, prepare a separate list for the authorised amount. Link the reopening, new authorisation and earlier reversal records to that list under the existing case reference. If that newly authorised payment also reverses, keep the reopened case active during review and link the new reversal and bank reason to its approval, envelope and batch. If the CEO closes the reopened case, archive all submitted lists and payment references with the new closure decision and retain the earlier closure and reopening records. If the bank reports a possible duplicate after closure, log the confirmed duplicate under the existing case reference and retain the closure decision. Send unmatched evidence to the reconciliation owner. If the amounts differ, log the amount discrepancy under the existing case reference. Attach both statements and the approved list, envelope and batch references.

Published version 9 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Follow up a reversed payment · Programme management · all

NSIPA local workflow

Provisional guidance

Track the existing payment and share the reversal evidence with Finance.

What to do

  1. Refresh the envelope report and record the reconciled and reversed counts for the current reference.
  2. Use Download report and include the programme, cycle, list revision, envelope and linked batch references.
  3. Send the evidence to Finance through the authorised reconciliation process.

What you need

Use the existing submitted payment as the record of the original instruction.

Next step

Follow the reconciliation outcome with Finance. Any corrective payment requires a separate authorised decision. If this is a corrective payment that has also reversed, put further payment attempts on hold. Send both payment reports and the case reference to Finance for escalation. If another payment is authorised, submit only the newly approved list after routing and final approval. If the case is closed, stop further payment attempts and retain both reports with the case reference. If a reversal is recorded after case closure, refresh and download the affected envelope report, send it to Finance, and hold further submissions while the case is reviewed. If a new payment is authorised after reopening, submit only the newly approved revision once sponsor bank routing is ready. Track its new envelope and batch in the case. If that newly authorised payment also reverses, hold further payment attempts for the reopened case. Download the latest report and give Finance the new payment references. When the CEO closes the reopened case, end further payment activity for the closed case. Retain the reports under the same case reference. When a possible duplicate arrives, refresh and download the existing envelope report and share both bank notices with Finance. Keep payment activity stopped for the closed case. If a later statement shows a different reversal amount, keep payment activity on hold while Finance verifies the amount. Share both bank statements and the current PBMS report.

Published version 9 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Process a further payment after two reversals · Programme management · all

NSIPA local workflow

Provisional guidance

Use this route when the authorised case decision permits a further disbursement after the original and corrective payments both reversed.

What to do

  1. CEO records the decision, reason, scope and amount under the authorised case process. Keep the decision reference with the case reference, Finance reconciliation and Audit evidence.
  2. Programme Admin prepares a separate disbursement list for the authorised programme and cycle. Link its revision to the decision and both reversed payment records. Use the approved sponsor bank route.
  3. Payment uses Initiate approval and includes the escalation decision reference. Finance validates the authorised amount and both reversals. Audit checks the links and prior approval history. CEO records final list approval in PBMS.
  4. Once this separate list shows Fully verified and routing is ready, Payment uses Proceed to payments and checks the count, amount and revision before choosing Confirm and proceed.
  5. Finance and Audit track the new envelope and batch independently. Record their references and final reconciliation in the existing case alongside both reversed payments.

What you need

Use the authorised case reference, CEO decision reference, both earlier lists and bank reconciliation evidence. Preserve both submitted lists under their existing payment references.

Next step

Follow the new payment to reconciliation and update the case with its outcome. Route a further exception through the authorised case process. If the new payment reverses after case closure, follow Reopen a closed case after a late reversal and hold any further submissions pending an authorised decision.

Published version 2 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Process an authorised payment after case reopening · Programme management · all

NSIPA local workflow

Provisional guidance

Use this workflow when the CEO records a separate payment authorisation after a reversal case is reopened. Keep the reopening and payment decisions under the existing case reference.

What to do

  1. CEO records the new payment decision, scope, amount and reason through the authorised case process. Reopening restores case follow-up. A separate authorisation is required for a new payment.
  2. Programme Admin prepares a separate disbursement list in the authorised programme and cycle. Link the new list to the case reference, reopening decision, new authorisation and each earlier payment and reversal. Configure the approved sponsor bank route.
  3. Payment initiates approval of the new list with the case and decision references. Finance verifies the net balance and authorised amount. Audit traces the decisions and earlier payment records. CEO records final approval of the new list revision.
  4. After the new list shows Fully verified and routing is ready, Payment compares the beneficiary count, amount and revision with the authorisation. Use Proceed to payments and Confirm and proceed for that approved list.
  5. Finance matches the new instruction to its bank statement entry. Audit preserves the new envelope, batch and reconciliation outcome alongside the earlier payment records and the closure, reopening and authorisation decisions.

What you need

Use a reopened case reference, a dated reopening decision, a separate payment authorisation, the updated reconciliation, and the prior approval and reversal evidence.

Next step

Record the new reconciliation outcome in the existing case. Use the authorised case process for any subsequent exception or closure decision. If the statement records another reversal while the case is reopened, keep the case active during review. Payment holds further attempts. Finance matches the debit and reversal, verifies the amount and reason, and updates the case balance. Audit retains the new approval and reversal trail. CEO reviews the new exception and records the disposition through the authorised case process. If the CEO decides to close the reopened case, follow Close a case after payment reversals and retain the earlier closure, reopening and payment authorisation.

Published version 3 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Read payment readiness and progress · Programme management · all

NSIPA local workflow

Provisional guidance

See whether the verified list is ready for payment or already submitted.

What to do

  1. Check the current revision, sponsor bank setup and displayed payment state.
  2. Open View payment progress when available and read the envelope, batch and settlement evidence.

What you need

The assigned Payment role submits the verified list. Programme Admin manages routing where authorised.

Next step

Use the payments screen or payment report to follow the next recorded step.

Published version 1 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Send a verified list for payment · Programme management · all

NSIPA local workflow

Provisional guidance

Follow the payment handover for the approved list and revision.

What to do

  1. Confirm Fully verified and review the displayed counts and amount.
  2. Check that approved sponsor bank routing is configured.
  3. For the Payment role, use Proceed to payments and review the confirmation before submitting.

What you need

Programme Admin configures sponsor bank routing when it is missing.

Next step

Track progress through the Bridge and bank evidence after submission.

Published version 1 · public guidance

Open this guide · Download plain text

Was this guide helpful?