Ask the local knowledge assistant
NSIPA knowledge library
Task guidance for each service and workflow stage. Local guides describe NSIPA; upstream references may describe other releases. Your account determines available actions.
531 published entries across 18 services · 64 source-linked guides
12 matching entries · Page 1 of 1
Process an authorised payment after case reopening · Programme management · all
NSIPA local workflow
Provisional guidance
Use this workflow when the CEO records a separate payment authorisation after a reversal case is reopened. Keep the reopening and payment decisions under the existing case reference.
What to do
- CEO records the new payment decision, scope, amount and reason through the authorised case process. Reopening restores case follow-up. A separate authorisation is required for a new payment.
- Programme Admin prepares a separate disbursement list in the authorised programme and cycle. Link the new list to the case reference, reopening decision, new authorisation and each earlier payment and reversal. Configure the approved sponsor bank route.
- Payment initiates approval of the new list with the case and decision references. Finance verifies the net balance and authorised amount. Audit traces the decisions and earlier payment records. CEO records final approval of the new list revision.
- After the new list shows Fully verified and routing is ready, Payment compares the beneficiary count, amount and revision with the authorisation. Use Proceed to payments and Confirm and proceed for that approved list.
- Finance matches the new instruction to its bank statement entry. Audit preserves the new envelope, batch and reconciliation outcome alongside the earlier payment records and the closure, reopening and authorisation decisions.
What you need
Use a reopened case reference, a dated reopening decision, a separate payment authorisation, the updated reconciliation, and the prior approval and reversal evidence.
Next step
Record the new reconciliation outcome in the existing case. Use the authorised case process for any subsequent exception or closure decision. If the statement records another reversal while the case is reopened, keep the case active during review. Payment holds further attempts. Finance matches the debit and reversal, verifies the amount and reason, and updates the case balance. Audit retains the new approval and reversal trail. CEO reviews the new exception and records the disposition through the authorised case process. If the CEO decides to close the reopened case, follow Close a case after payment reversals and retain the earlier closure, reopening and payment authorisation.
Published version 3 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Close a case after payment reversals · Programme management · all
NSIPA local workflow
Provisional guidance
Use this workflow when the authorised decision closes a case after payment reversals, including a case that was reopened and had a further payment reverse.
What to do
- Finance matches each payment and reversal to its bank statement entry, verifies the amounts, dates and reasons, and records the final case balance. Record the approved disposition for any remaining difference.
- Audit verifies all submitted revisions, approval histories, envelope and batch references, and the bank statement evidence. For a reopened case, verify the earlier closure, reopening and any subsequent payment authorisation as part of the same decision history.
- CEO records the closure reason, date and disposition in the authorised case process. For a reopened case, add a dated closure decision under the existing case reference and retain the prior decisions.
- Programme Admin archives the closure with all submitted lists and payment references. Payment ends further payment activity for the closed case and retains the reports.
What you need
Use the existing case reference, final Finance reconciliation, Audit evidence and the recorded CEO closure decision. Close report in PBMS dismisses the report window. Record case closure through the authorised case process.
Next step
Keep all submitted lists and payment reports available for audit with their original approval and reversal records. If a later statement records a new reversal, follow Reopen a closed case after a late reversal under the same case reference. For a retransmitted reversal, follow Handle a duplicate payment reversal. Keep the existing closure when Finance confirms the same bank movement. Use the reopening process for a genuinely new reversal or another exception that requires a case decision. If a later statement gives a different amount for an existing reversal, follow Resolve a reversal amount discrepancy before making a new case decision.
Published version 5 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Handle a duplicate payment reversal · Programme management · all
NSIPA local workflow
Provisional guidance
Review a bank reversal that may already be recorded on the same PBMS instruction, including after case closure.
What to do
- Payment refreshes and downloads the existing envelope report. Share the original and latest bank notices with Finance, along with the approved list, revision, envelope and batch references. Keep payment activity stopped for the closed case.
- Finance matches the payment instruction and bank transaction reference, amount and value date to the reversal already reconciled. Check the original and latest statement reference. An exact resend can reuse the original receipt. When Bridge accepts a second statement for an instruction with a recorded reversal, it keeps the first reversal and its count. Compare the bank entries to confirm that the second receipt refers to the same movement. Compare both statement references even when the PBMS totals appear consistent. If reversals exceed reconciled instructions, log a report discrepancy and verify the case balance from the matched bank evidence.
- If the same movement is confirmed, use the original reversal once in the case total. Audit retains the original closure, bank evidence and duplicate confirmation. Programme Admin logs the repeat receipt against the existing case reference.
- If evidence indicates a new movement or an unresolved difference, document the discrepancy and route it through the authorised case process. CEO reviews the Finance and Audit evidence and records any required decision on reopening.
What you need
Use the existing case reference, the original payment and reversal evidence, and the latest bank evidence. The PBMS envelope totals can support the review. Confirm duplication from the bank entries.
Next step
Keep the existing closure once the duplicate is confirmed. Follow the authorised reconciliation process for an unresolved difference or a separate reversal. When the amounts differ, use Resolve a reversal amount discrepancy and record the disagreement while Finance verifies the bank movement. Bridge records a reversal amount exception when the amounts differ or the original amount cannot be verified.
Published version 5 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Reopen a closed case after a late reversal · Programme management · all
NSIPA local workflow
Provisional guidance
Use this workflow when a bank statement records a reversal against a payment after the case was closed. The PBMS envelope report can show the instruction as both reconciled and reversed.
What to do
- Payment refreshes and downloads the affected envelope report, records the list, revision, envelope and batch references, and gives the evidence to Finance. Hold further payment submissions.
- Finance matches the late statement entry to the affected instruction. Check the amount, effective date and reason, then recalculate the net balance across all linked payments and reversals. Record any unresolved difference.
- Programme Admin requests reopening under the existing case reference. Attach the late reversal evidence, the updated Finance reconciliation and the original closure decision.
- Audit verifies the chronology from approval through dispatch, reconciliation, closure and late reversal. Keep the original closure evidence and trace each payment to its own submitted revision, envelope, batch and bank statement entry.
- CEO reviews the Finance and Audit evidence and records the reopening decision, reason, date and follow-up owner in the authorised case process. Keep any later payment decision separate from reopening.
What you need
Use the same case reference and retain the closure decision, all linked approval histories, payment and reversal references, and the new bank statement evidence. PBMS reports provide Refresh report and Download report. Record reopening through the authorised case process.
Next step
Update the reopened case with the reconciliation outcome and assigned follow-up. A further disbursement requires separate authorisation and the applicable list approvals. When a separate payment authorisation is recorded, follow Process an authorised payment after case reopening.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Confirm the approved payment submission · Programme management · all
NSIPA local workflow
Provisional guidance
Verify exactly which approved list PBMS is about to submit for payment processing.
What to do
- Compare the beneficiary count, Total NGN and revision in the confirmation with the verified list.
- Use Cancel if anything differs from the approved information.
- Choose Confirm and proceed when the displayed snapshot is correct.
What you need
Use the authorised Payment account and the configured sponsor bank route. For a corrective payment, verify the case reference and confirm that the count, total and revision belong to the separately approved list. After two reversals, check the escalation decision reference and authorised amount against this new list before confirming. A closure decision ends payment follow-up. After case reopening, match the new payment authorisation and the approved revision to the count and amount shown. Use Cancel if they differ.
Next step
After submission, use View payment progress to track the existing envelope and batches.
Published version 4 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Follow up a reversed payment · Programme management · all
NSIPA local workflow
Provisional guidance
Track the existing payment and share the reversal evidence with Finance.
What to do
- Refresh the envelope report and record the reconciled and reversed counts for the current reference.
- Use Download report and include the programme, cycle, list revision, envelope and linked batch references.
- Send the evidence to Finance through the authorised reconciliation process.
What you need
Use the existing submitted payment as the record of the original instruction.
Next step
Follow the reconciliation outcome with Finance. Any corrective payment requires a separate authorised decision. If this is a corrective payment that has also reversed, put further payment attempts on hold. Send both payment reports and the case reference to Finance for escalation. If another payment is authorised, submit only the newly approved list after routing and final approval. If the case is closed, stop further payment attempts and retain both reports with the case reference. If a reversal is recorded after case closure, refresh and download the affected envelope report, send it to Finance, and hold further submissions while the case is reviewed. If a new payment is authorised after reopening, submit only the newly approved revision once sponsor bank routing is ready. Track its new envelope and batch in the case. If that newly authorised payment also reverses, hold further payment attempts for the reopened case. Download the latest report and give Finance the new payment references. When the CEO closes the reopened case, end further payment activity for the closed case. Retain the reports under the same case reference. When a possible duplicate arrives, refresh and download the existing envelope report and share both bank notices with Finance. Keep payment activity stopped for the closed case. If a later statement shows a different reversal amount, keep payment activity on hold while Finance verifies the amount. Share both bank statements and the current PBMS report.
Published version 9 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Review a reported payment reversal · Programme management · all
NSIPA local workflow
Provisional guidance
An envelope can contain reconciled disbursements and recorded reversals. Review both counts before closing the reconciliation.
What to do
- Check the number of disbursements reversed alongside the reconciled count.
- Compare both counts with the approved beneficiary count and total.
- Use Refresh report or Download report to capture evidence for the existing envelope and linked batch.
What you need
Keep the list, revision, envelope and batch references with the report.
Next step
Refer the reversal through the authorised reconciliation process. A corrective payment requires an authorised decision. If this is a corrective payment that has also reversed, keep both submitted lists and payment references on the case and escalate before any further payment attempt. After both payments reverse, check the authorised case decision. A further payment goes through a new approval list. Closure records the disposition and ends payment follow-up for the case. If the reversal arrived after case closure, route the new evidence through the authorised reopening process using the same case reference. If a reopened case has a separate payment authorisation, follow it through a new approval list and keep all earlier reversals linked to the case. If a payment authorised after reopening also reverses, retain its report and statement entries with the existing case. Use the authorised process to resolve the new exception. If the CEO closes the reopened case, retain every submitted list and reversal record under the same case reference and follow the recorded closure disposition. If the bank reports the same reversal again, confirm the underlying movement with Finance before changing the case balance or closure status. For an already recorded reversal on a second statement, verify the bank movement and retain both receipt references with the first reversal. If a later statement reports a different reversal amount for the same instruction, use Resolve a reversal amount discrepancy and refer the bank evidence to Finance.
Published version 10 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Coordinate reversal follow-up · Programme management · all
NSIPA local workflow
Provisional guidance
Connect the reported reversal to the original programme, cycle and approved list.
What to do
- Check the programme, cycle and revision against the submitted list and Verification history.
- Keep the original approved list and payment reference in the case record.
- Give Payment and Finance the list, envelope and batch references through the authorised follow-up process.
What you need
The submitted payment report supports refresh and download. List correction and sponsor bank routing are locked for this submission.
Next step
Coordinate supporting information for the reconciliation owner. Route any proposed corrective action through the authorised process. If this is a corrective payment that has also reversed, link both submitted lists, their revisions and both envelope and batch references in the existing case. Notify Payment and Finance that the case remains open. If the CEO authorises another payment, prepare a separate disbursement list and link it to the decision and both reversals. If the CEO closes the case, archive both submitted lists and their references with the closure record. If a reversal is recorded after case closure, request reopening under the same case reference. Link the newly reversed payment and the closure decision to the existing case. If a new payment is authorised after reopening, prepare a separate list for the authorised amount. Link the reopening, new authorisation and earlier reversal records to that list under the existing case reference. If that newly authorised payment also reverses, keep the reopened case active during review and link the new reversal and bank reason to its approval, envelope and batch. If the CEO closes the reopened case, archive all submitted lists and payment references with the new closure decision and retain the earlier closure and reopening records. If the bank reports a possible duplicate after closure, log the confirmed duplicate under the existing case reference and retain the closure decision. Send unmatched evidence to the reconciliation owner. If the amounts differ, log the amount discrepancy under the existing case reference. Attach both statements and the approved list, envelope and batch references.
Published version 9 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Read the envelope reconciliation report · Programme management · all
NSIPA local workflow
Provisional guidance
Check how many disbursements in this envelope have been reconciled or reversed.
What to do
- Compare the reconciled and reversed counts with the expected beneficiary count and quantity on the envelope and approved list.
- Choose Refresh report for the latest status or Download report for approved evidence handling.
- Investigate any shortfall, reversal or inconsistency using the envelope and linked batch references.
What you need
Use the report for this list and revision when recording the reconciliation result. For a corrective payment, record the new envelope and batch separately from the original reversal evidence.
Next step
If counts are incomplete, continue tracking the existing envelope and raise unresolved differences through the authorised reconciliation process. For a new payment after case reopening, record the new reconciliation outcome in the existing case and retain the earlier reversal reports.
Published version 3 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Reconcile the reported reversal · Programme management · all
NSIPA local workflow
Provisional guidance
Determine the financial impact using the reported reversal and the matched statement entry.
What to do
- Compare the reconciled and reversed counts with the approved totals.
- Match the statement entry to the relevant payment reference and verify the amount and effective date against the bank evidence available to you.
- Record the discrepancy and the reconciliation disposition through the authorised process.
What you need
A reconciled count can include a reversed instruction. Check the individual evidence before recording the outcome.
Next step
Share the reconciliation summary with the designated reviewer or decision owner. Preserve the original list, revision and references. If this is a corrective payment that has also reversed, match both payments and both reversals against the bank statement. Confirm the net amount and any unresolved difference, then send the reconciliation summary for an authorised decision. If another payment is authorised, validate the newly authorised amount against the reconciliation and check the new list. If the case is closed, record the final reconciliation outcome and any residual exception in the case. If a reversal is recorded after case closure, match the new bank statement entry, recalculate the case balance across all linked payments and reversals, and submit the updated reconciliation for reopening review. If a new payment is authorised after reopening, verify all linked payments and reversals against the updated case balance and check the new authorised amount. Reconcile the new instruction separately. If that newly authorised payment also reverses, match the new debit and reversal, verify the statement amount, date and reason, and update the reconciliation for the case. For closure after reopening, record the final case balance after matching each payment and reversal, and document any remaining difference and its disposition. For a possible duplicate, compare the bank transaction reference, amount and value date against the reversal already matched to this instruction. Verify the bank movement before recording the original reversal once in the case total. Investigate any difference in the entry or totals. Compare both statement references when a repeat entry arrives on a separately issued statement. For the same movement on a second statement, check that the report still counts the first reversal once and retain both statement references in the case. If the values differ, record the original amount, the later amount and the difference. Verify the movement and effective date with the bank before using either figure to update the case balance.
Published version 11 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Review the reversal escalation · Programme management · all
NSIPA local workflow
Provisional guidance
Review the reversal with the Finance reconciliation summary and Audit evidence.
What to do
- Confirm the affected payment references and the outcome established by Finance.
- Review the proposed response through the organisation’s authorised decision or escalation process.
- Record the resulting direction in the approved process with the supporting evidence.
What you need
Refresh or download the envelope report when reviewing the escalation. The existing approval history identifies the submitted revision.
Next step
Any corrective payment requires a separate authorised decision and the applicable review process. If this is a corrective payment that has also reversed, review Finance and Audit evidence for both payments and record the escalation decision through the authorised process. The prior approval applies only to the submitted corrective list. To authorise another payment, record the scope and amount of the new authorisation in the authorised case process. To close the case, record the closure decision and reason with the final reconciliation and Audit evidence. Approve and save applies to the current PBMS list revision. If a reversal is recorded after case closure, review the updated Finance and Audit evidence and record the reopening decision, reason and assigned follow-up through the authorised case process. A further payment requires its own authorised decision and approvals. If another payment is warranted after reopening, record a separate payment authorisation with its amount, scope and reason in the authorised case process. The new list then needs its own Finance, Audit and CEO approvals. If that newly authorised payment also reverses, review the new exception under the reopened case and record the next disposition. Any further payment requires its own authorisation and approvals. To close the reopened case, use the updated Finance reconciliation and Audit evidence to record the new closure decision and reason under the same case reference. Include the date and disposition. If the bank reports a possible duplicate after closure, keep the existing closure if Finance confirms the duplicate. Review any new movement or unresolved difference through the authorised case process. If Finance confirms that the later statement shows a different amount, review the unresolved amount before deciding whether to reopen. Record the disposition under the existing case reference.
Published version 9 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Verify reversal evidence · Programme management · all
NSIPA local workflow
Provisional guidance
Review the evidence that links the reversal to the approved revision and original payment.
What to do
- Use Refresh report and Download report to capture the current envelope evidence.
- Compare the reversal and linked batch references with the approved list, approval history and available statement evidence.
- Keep the evidence with the related issue or audit record through the approved process.
What you need
Use the submitted revision to identify what was authorised and what actually occurred.
Next step
Escalate any missing or inconsistent evidence to the designated owner for resolution. If this is a corrective payment that has also reversed, preserve both approval histories and match each envelope, batch and bank statement entry to its submitted list. Escalate gaps in the chronology or evidence. If another payment is authorised, trace the new list to the decision and both prior reversals. If the case is closed, verify the closure evidence and retain both approved revisions with their payment and reversal references. If a reversal is recorded after case closure, preserve the original closure decision and evidence. Verify the late reversal against the affected approval, envelope, batch and bank statement before reviewing the reopening. If a new payment is authorised after reopening, trace the closure, reopening and payment authorisation to the new list. Keep each prior approval and reversal reference available for review. If that newly authorised payment also reverses, retain the new approval and reversal trail alongside the earlier decisions. Verify both the new payment and the reversal evidence. For closure after reopening, verify the full decision history, including the earlier closure, reopening, new authorisation and final closure. Link each submitted revision and reversal to the case. For a possible duplicate after closure, preserve the original closure and retransmission evidence. Check the payment, bank movement and duplicate confirmation against the original reversal. For a confirmed duplicate on a second statement, verify that the first reversal reference is preserved and attach the second receipt to the audit record. For a later statement with a different amount, preserve both statements and the original closure decision. Trace both entries to the submitted instruction and retain the bank confirmation.
Published version 10 · public guidanceOpen this guide · Download plain text
Was this guide helpful?