Open Master Beneficiary Registry workspace ↗Skip to main content
NSIPA — National Social Investment Programmes AgencyNSIPA
Registration & enrollment
SYNTHETIC SANDBOX • Use fictional people and households. This service does not verify NIN or issue real payments.

Ask the local knowledge assistant

NSIPA knowledge library

Task guidance for each service and workflow stage. Local guides describe NSIPA; upstream references may describe other releases. Your account determines available actions.

531 published entries across 18 services · 64 source-linked guides

Persona workspace

16 matching entries · Page 1 of 2

Payment status report · Programme management · all

NSIPA local workflow

Provisional guidance

Read the payment processing and settlement evidence for the selected batch.

What to do

  1. Confirm the list and batch reference.
  2. Use Refresh report for the latest Bridge response.
  3. Read dispatch and settlement fields separately, then review any error or pending message.

What you need

Use the available bank or reconciliation evidence for final settlement status.

Next step

Escalate incomplete or inconsistent results with the reference and observed state.

Published version 2 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Wait for the payment status report · Programme management · all

NSIPA local workflow

Provisional guidance

Bridge has accepted the request and is preparing the report for this reference.

What to do

  1. Choose Refresh report after a short wait.
  2. Use the current envelope or batch reference when checking again.
  3. If the report remains pending, share the reference and observed status with the authorised support team.

What you need

The report is for the existing payment request.

Next step

Continue tracking the same envelope or batch until evidence is available.

Published version 1 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Review a reported payment reversal · Programme management · all

NSIPA local workflow

Provisional guidance

An envelope can contain reconciled disbursements and recorded reversals. Review both counts before closing the reconciliation.

What to do

  1. Check the number of disbursements reversed alongside the reconciled count.
  2. Compare both counts with the approved beneficiary count and total.
  3. Use Refresh report or Download report to capture evidence for the existing envelope and linked batch.

What you need

Keep the list, revision, envelope and batch references with the report.

Next step

Refer the reversal through the authorised reconciliation process. A corrective payment requires an authorised decision. If this is a corrective payment that has also reversed, keep both submitted lists and payment references on the case and escalate before any further payment attempt. After both payments reverse, check the authorised case decision. A further payment goes through a new approval list. Closure records the disposition and ends payment follow-up for the case. If the reversal arrived after case closure, route the new evidence through the authorised reopening process using the same case reference. If a reopened case has a separate payment authorisation, follow it through a new approval list and keep all earlier reversals linked to the case. If a payment authorised after reopening also reverses, retain its report and statement entries with the existing case. Use the authorised process to resolve the new exception. If the CEO closes the reopened case, retain every submitted list and reversal record under the same case reference and follow the recorded closure disposition. If the bank reports the same reversal again, confirm the underlying movement with Finance before changing the case balance or closure status. For an already recorded reversal on a second statement, verify the bank movement and retain both receipt references with the first reversal. If a later statement reports a different reversal amount for the same instruction, use Resolve a reversal amount discrepancy and refer the bank evidence to Finance.

Published version 10 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Payment account details · Beneficiary portal · all

Upstream reference — confirm feature availability

Provisional guidance

View and manage the payment-account mapping for your approved NSIPA household using the existing account service. Linking an account does not approve benefits or initiate payment.

What to do

  1. Review the currently linked account, or confirm that no account is linked.
  2. Enter a fictional account number starting LAB- followed by 4–32 letters, digits or hyphens. Select Link account or Update account and wait for the saved mapping.
  3. To unlink a mapping, select Remove account, review the effect on future routing, then select Confirm removal. Cancel leaves the mapping unchanged.
  4. Refresh the screen to verify the result. Both NSIPA domains display the same household mapping.

What you need

Sign in as the beneficiary whose household is approved and synchronisation is complete. This installation supports fictional Example Bank Simulator accounts only.

Next step

Return to Benefits to review recorded benefits, or Complaints to report an account issue. An account mapping is not evidence of a completed payment.

Common issues

If registration is not approved and synchronised, use Registries to check its status. If another session changed the account, refresh before trying again. If a request times out, refresh and inspect the saved mapping before retrying. Never enter real bank details in this sandbox.

Published version 4 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Check payment envelopes and reconciliation · Programme management · all

NSIPA local workflow

Provisional guidance

Use the envelope to check totals and follow reconciliation for the approved list.

What to do

  1. Match the envelope benefit, beneficiary count and total quantity to the approved list.
  2. Choose View report beside that envelope and review the reconciliation and reversal totals.
  3. Use Refresh report if the latest recorded status is pending.

What you need

Keep the envelope reference with the approved list and revision.

Next step

Investigate discrepancies using the envelope and batch references before closing reconciliation.

Published version 1 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Payments · Programme management · all

NSIPA local workflow

Provisional guidance

Track payment instructions from envelope and batch creation to the returned payment report.

What to do

  1. Open a disbursement list and inspect its envelope and batch creation status.
  2. Open the Payments tab and select the required envelope or batch report.
  3. Review dispatch and reconciliation separately. Submission to Bridge is not confirmation of bank settlement.

What you need

An authorised PBMS staff account and the correct programme or record reference. Available actions depend on your assigned permissions.

Next step

Confirm the status or saved values shown by PBMS before continuing. For payment reports, confirm the returned settlement state separately from dispatch.

Common issues

If data is missing, check the current filters and programme selection, then refresh. Resolve displayed validation errors before retrying. If access is denied or processing remains failed, contact the PBMS administrator with the record reference and error message.

Published version 2 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Payments and reconciliation · Programme management · all

NSIPA local workflow

Provisional guidance

Follow disbursement instructions, dispatch and settlement evidence.

What to do

  1. Open the payment entry for the correct programme and disbursement list.
  2. Check the envelope and batch status and refresh available payment reports.
  3. Review bank settlement or reconciliation evidence separately from dispatch status.

What you need

Use the list reference when investigating a failure or mismatch.

Next step

A dispatch or Bridge acknowledgement confirms processing at that step. Check settlement separately.

Published version 1 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Read the envelope reconciliation report · Programme management · all

NSIPA local workflow

Provisional guidance

Check how many disbursements in this envelope have been reconciled or reversed.

What to do

  1. Compare the reconciled and reversed counts with the expected beneficiary count and quantity on the envelope and approved list.
  2. Choose Refresh report for the latest status or Download report for approved evidence handling.
  3. Investigate any shortfall, reversal or inconsistency using the envelope and linked batch references.

What you need

Use the report for this list and revision when recording the reconciliation result. For a corrective payment, record the new envelope and batch separately from the original reversal evidence.

Next step

If counts are incomplete, continue tracking the existing envelope and raise unresolved differences through the authorised reconciliation process. For a new payment after case reopening, record the new reconciliation outcome in the existing case and retain the earlier reversal reports.

Published version 3 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Track the submitted payment · Programme management · all

NSIPA local workflow

Provisional guidance

Follow the payment request already recorded for this approved list.

What to do

  1. Check the submission record and displayed Envelope and Batch status.
  2. Choose View payment progress, then open Payments for the linked envelopes and batches.
  3. Use the reports to check dispatch and reconciliation separately.

What you need

Use the same programme, cycle, list and approved revision when following progress.

Next step

If the status is pending, refresh the workflow or report for this request. Escalate an error with the list and payment references. For a further payment after two reversals, record this new envelope and batch in the existing case and track the reconciliation separately. After case reopening, link the new envelope and batch to the existing case reference and keep its reconciliation separate from the earlier payments.

Published version 3 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Payment Batches · Beneficiary programme administration · all

NSIPA local workflow

Provisional guidance

Track payment batches and distinguish processing from confirmed settlement.

What to do

  1. Select the payment or batch for the correct programme and cycle.
  2. Check participants, totals and the recorded processing status.
  3. Use available details or reports to confirm the outcome; a generated or submitted payment instruction is not proof of bank settlement.

What you need

An account with permission for this screen and the correct record or configuration reference.

Next step

Confirm the resulting values or status in the related record before continuing with the next authorised task.

Common issues

Check filters, required fields and related records if an entry is missing or cannot be saved. Do not delete a referenced value or repeat a processing action to bypass an error. Contact the administrator with the record reference and displayed message if the issue remains.

Published version 2 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Payments · Beneficiary programme administration · all

NSIPA local workflow

Provisional guidance

Track payments and distinguish processing from confirmed settlement.

What to do

  1. Select the payment or batch for the correct programme and cycle.
  2. Check participants, totals and the recorded processing status.
  3. Use available details or reports to confirm the outcome; a generated or submitted payment instruction is not proof of bank settlement.

What you need

An account with permission for this screen and the correct record or configuration reference.

Next step

Confirm the resulting values or status in the related record before continuing with the next authorised task.

Common issues

Check filters, required fields and related records if an entry is missing or cannot be saved. Do not delete a referenced value or repeat a processing action to bypass an error. Contact the administrator with the record reference and displayed message if the issue remains.

Published version 2 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Disbursement · Programme management · all

Provisional guidance

Prepare and follow the existing benefit disbursement workflow.

What to do

  1. Check the approved benefit list and cycle.
  2. Complete the required independent authorisations.
  3. Monitor the existing disbursement status and exceptions.

What you need

Approved benefits and the required financial authorisations.

Next step

Reconcile reported payment outcomes.

Common issues

This sandbox does not issue real payments. Help content cannot grant financial authority.

Published version 2 · public guidance

Open this guide · Download plain text

Was this guide helpful?