Ask the local knowledge assistant
NSIPA knowledge library
Task guidance for each service and workflow stage. Local guides describe NSIPA; upstream references may describe other releases. Your account determines available actions.
531 published entries across 18 services · 64 source-linked guides
11 matching entries · Page 1 of 1
Coordinate the partial payment follow-up · Programme management · all
NSIPA local workflow
Provisional guidance
Some declared instructions still await reconciliation, or this envelope includes both reconciled instructions and reversals.
What to do
- Open View payment progress and Refresh report. Compare Disbursements declared, reconciled and reversed. Check batch dispatch and financial address resolution when an instruction has no statement match.
- Check the approved list revision and the routed batch. Ask Payment and Finance to identify affected instructions and the reason each remains open.
What you need
Use the original envelope, batch and approved list revision. The counts describe instructions. Confirm the amount against authorised payment and statement evidence.
Next step
Keep the approved list and its revision intact. Coordinate any authorised new list after Finance confirms the outcome.
Published version 1 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Escalate a reversed corrective payment · Programme management · all
NSIPA local workflow
Provisional guidance
Use the existing case reference when a separately approved corrective payment also has a recorded reversal. In the envelope report, an instruction can count as both reconciled and reversed.
What to do
- Programme Admin links both submitted lists, their revisions, envelope and batch references, and payment and reversal references to the existing case.
- Payment refreshes and downloads both envelope reports, gives Finance the case reference and supporting reports, and holds further payment attempts pending an authorised decision.
- Finance matches each payment and reversal to its bank statement entry, verifies the amounts, dates and reasons, and records the net amount and any unresolved difference.
- Audit checks both approval histories and the links between each approved revision, instruction and reversal. Preserve the evidence for both payments in the case.
- CEO reviews the Finance reconciliation and Audit evidence and records the decision through the authorised escalation process. Any further disbursement needs a separate authorised decision and the applicable approvals.
What you need
Both submitted lists and approval histories, both envelope and batch references, the relevant bank statement entries, and the existing case reference. Use Refresh report or Download report to collect evidence from PBMS.
Next step
Keep the case open pending the authorised decision. If another payment is authorised, follow Process a further payment after two reversals. If the decision is to close, follow Close a case after payment reversals. Record the decision under the authorised case process. If a reversal arrives after closure, use Reopen a closed case after a late reversal and keep the original closure decision.
Published version 4 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Follow a partially reconciled payment · Programme management · all
NSIPA local workflow
Provisional guidance
Track the original payment by instruction when the envelope shows different outcomes.
What to do
- Payment records the envelope and batch, then provides the unresolved instruction references to Finance.
- Finance compares the approved amounts with statement entries and records pending, reconciled and reversed instructions separately. Audit checks that the evidence and original revision remain traceable.
- Programme Admin coordinates follow-up for the confirmed exception. The CEO handles escalation where the approved procedure requires a decision.
What you need
Use the current reports and authorised instruction-level evidence. A processed dispatch means Bridge processed the dispatch step.
Next step
Keep the original envelope open for reconciliation follow-up until outstanding outcomes are confirmed. Any corrective instruction uses a separately authorised and approved list.
Published version 1 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Follow up a reversed payment · Programme management · all
NSIPA local workflow
Provisional guidance
Track the existing payment and share the reversal evidence with Finance.
What to do
- Refresh the envelope report and record the reconciled and reversed counts for the current reference.
- Use Download report and include the programme, cycle, list revision, envelope and linked batch references.
- Send the evidence to Finance through the authorised reconciliation process.
What you need
Use the existing submitted payment as the record of the original instruction.
Next step
Follow the reconciliation outcome with Finance. Any corrective payment requires a separate authorised decision. If this is a corrective payment that has also reversed, put further payment attempts on hold. Send both payment reports and the case reference to Finance for escalation. If another payment is authorised, submit only the newly approved list after routing and final approval. If the case is closed, stop further payment attempts and retain both reports with the case reference. If a reversal is recorded after case closure, refresh and download the affected envelope report, send it to Finance, and hold further submissions while the case is reviewed. If a new payment is authorised after reopening, submit only the newly approved revision once sponsor bank routing is ready. Track its new envelope and batch in the case. If that newly authorised payment also reverses, hold further payment attempts for the reopened case. Download the latest report and give Finance the new payment references. When the CEO closes the reopened case, end further payment activity for the closed case. Retain the reports under the same case reference. When a possible duplicate arrives, refresh and download the existing envelope report and share both bank notices with Finance. Keep payment activity stopped for the closed case. If a later statement shows a different reversal amount, keep payment activity on hold while Finance verifies the amount. Share both bank statements and the current PBMS report.
Published version 9 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Reopen a closed case after a late reversal · Programme management · all
NSIPA local workflow
Provisional guidance
Use this workflow when a bank statement records a reversal against a payment after the case was closed. The PBMS envelope report can show the instruction as both reconciled and reversed.
What to do
- Payment refreshes and downloads the affected envelope report, records the list, revision, envelope and batch references, and gives the evidence to Finance. Hold further payment submissions.
- Finance matches the late statement entry to the affected instruction. Check the amount, effective date and reason, then recalculate the net balance across all linked payments and reversals. Record any unresolved difference.
- Programme Admin requests reopening under the existing case reference. Attach the late reversal evidence, the updated Finance reconciliation and the original closure decision.
- Audit verifies the chronology from approval through dispatch, reconciliation, closure and late reversal. Keep the original closure evidence and trace each payment to its own submitted revision, envelope, batch and bank statement entry.
- CEO reviews the Finance and Audit evidence and records the reopening decision, reason, date and follow-up owner in the authorised case process. Keep any later payment decision separate from reopening.
What you need
Use the same case reference and retain the closure decision, all linked approval histories, payment and reversal references, and the new bank statement evidence. PBMS reports provide Refresh report and Download report. Record reopening through the authorised case process.
Next step
Update the reopened case with the reconciliation outcome and assigned follow-up. A further disbursement requires separate authorisation and the applicable list approvals. When a separate payment authorisation is recorded, follow Process an authorised payment after case reopening.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
From programme setup to payment reconciliation · Programme management · all
NSIPA local workflow
Provisional guidance
Follow the installed PBMS workflow from programme configuration through list approval, payment and reconciliation.
What to do
- Programme Admin configures the source registry, eligibility rule, benefit and enrolment and disbursement cycles. Use the authorised programme rules and review the calculated list.
- Payment submits the list to Finance. Finance, Audit and CEO decide in order. Programme Admin corrects a returned list and Payment resubmits it as a new revision for review.
- After final approval, Programme Admin can export the fully verified list and configures the approved sponsor bank route when needed. The assigned Payment role confirms the verified count, amount and revision before submitting the payment.
- Open View payment progress. Use the batch report to check dispatch and the envelope report to check reconciliation and reversals. Bridge exchanges and tracks payment instructions and reconciliation evidence between PBMS and the bank.
- Refer a failed, incomplete or reversed payment through the authorised reconciliation process. Retain the submitted list, envelope, batch and bank statement references for review.
What you need
Use the approved programme rules and the assigned roles. Eligibility, authorisation limits, sponsor bank controls and reconciliation rules require the applicable approved sources.
Next step
Record the verified outcome against the existing payment references. Refer unresolved differences through the authorised process before closing the reconciliation.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Process a further payment after two reversals · Programme management · all
NSIPA local workflow
Provisional guidance
Use this route when the authorised case decision permits a further disbursement after the original and corrective payments both reversed.
What to do
- CEO records the decision, reason, scope and amount under the authorised case process. Keep the decision reference with the case reference, Finance reconciliation and Audit evidence.
- Programme Admin prepares a separate disbursement list for the authorised programme and cycle. Link its revision to the decision and both reversed payment records. Use the approved sponsor bank route.
- Payment uses Initiate approval and includes the escalation decision reference. Finance validates the authorised amount and both reversals. Audit checks the links and prior approval history. CEO records final list approval in PBMS.
- Once this separate list shows Fully verified and routing is ready, Payment uses Proceed to payments and checks the count, amount and revision before choosing Confirm and proceed.
- Finance and Audit track the new envelope and batch independently. Record their references and final reconciliation in the existing case alongside both reversed payments.
What you need
Use the authorised case reference, CEO decision reference, both earlier lists and bank reconciliation evidence. Preserve both submitted lists under their existing payment references.
Next step
Follow the new payment to reconciliation and update the case with its outcome. Route a further exception through the authorised case process. If the new payment reverses after case closure, follow Reopen a closed case after a late reversal and hold any further submissions pending an authorised decision.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Coordinate reversal follow-up · Programme management · all
NSIPA local workflow
Provisional guidance
Connect the reported reversal to the original programme, cycle and approved list.
What to do
- Check the programme, cycle and revision against the submitted list and Verification history.
- Keep the original approved list and payment reference in the case record.
- Give Payment and Finance the list, envelope and batch references through the authorised follow-up process.
What you need
The submitted payment report supports refresh and download. List correction and sponsor bank routing are locked for this submission.
Next step
Coordinate supporting information for the reconciliation owner. Route any proposed corrective action through the authorised process. If this is a corrective payment that has also reversed, link both submitted lists, their revisions and both envelope and batch references in the existing case. Notify Payment and Finance that the case remains open. If the CEO authorises another payment, prepare a separate disbursement list and link it to the decision and both reversals. If the CEO closes the case, archive both submitted lists and their references with the closure record. If a reversal is recorded after case closure, request reopening under the same case reference. Link the newly reversed payment and the closure decision to the existing case. If a new payment is authorised after reopening, prepare a separate list for the authorised amount. Link the reopening, new authorisation and earlier reversal records to that list under the existing case reference. If that newly authorised payment also reverses, keep the reopened case active during review and link the new reversal and bank reason to its approval, envelope and batch. If the CEO closes the reopened case, archive all submitted lists and payment references with the new closure decision and retain the earlier closure and reopening records. If the bank reports a possible duplicate after closure, log the confirmed duplicate under the existing case reference and retain the closure decision. Send unmatched evidence to the reconciliation owner. If the amounts differ, log the amount discrepancy under the existing case reference. Attach both statements and the approved list, envelope and batch references.
Published version 9 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Process an authorised corrective payment · Programme management · all
NSIPA local workflow
Provisional guidance
Follow the approved corrective decision while keeping the original reversal and any new PBMS payment traceable.
What to do
- Confirm the authorised decision and its case reference, affected instruction and approved amount. Keep the original list revision, envelope, batch and reversal evidence on the case.
- If the authorised procedure calls for a PBMS disbursement, Programme Admin prepares a separate list in the authorised programme and cycle. Record the link to the original reversal using the approved case record or available reference fields.
- Payment initiates approval of the separate list. Finance checks the amount and reversal evidence, Audit checks the approval trail and references, and CEO records the final list decision under the configured workflow.
- Once the separate list is Fully verified and routing is configured, Payment reviews its beneficiary count, total and revision in the confirmation and submits it through the normal payment action.
- Finance and Audit compare the new envelope and batch with the corrective approval and reconcile the new instruction separately. Keep both sets of references. Escalate a further reversal through the authorised process.
What you need
An authorised corrective decision and its supporting evidence are required. PBMS keeps the original submitted list available for review and uses its regular approval flow for the separate list.
Next step
Record the new dispatch and reconciliation outcome in the corrective case while retaining the original reversal evidence. If the corrective payment is reversed, follow the escalation guidance for a reversed corrective payment and hold further payment attempts pending an authorised decision.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Review a reported payment reversal · Programme management · all
NSIPA local workflow
Provisional guidance
An envelope can contain reconciled disbursements and recorded reversals. Review both counts before closing the reconciliation.
What to do
- Check the number of disbursements reversed alongside the reconciled count.
- Compare both counts with the approved beneficiary count and total.
- Use Refresh report or Download report to capture evidence for the existing envelope and linked batch.
What you need
Keep the list, revision, envelope and batch references with the report.
Next step
Refer the reversal through the authorised reconciliation process. A corrective payment requires an authorised decision. If this is a corrective payment that has also reversed, keep both submitted lists and payment references on the case and escalate before any further payment attempt. After both payments reverse, check the authorised case decision. A further payment goes through a new approval list. Closure records the disposition and ends payment follow-up for the case. If the reversal arrived after case closure, route the new evidence through the authorised reopening process using the same case reference. If a reopened case has a separate payment authorisation, follow it through a new approval list and keep all earlier reversals linked to the case. If a payment authorised after reopening also reverses, retain its report and statement entries with the existing case. Use the authorised process to resolve the new exception. If the CEO closes the reopened case, retain every submitted list and reversal record under the same case reference and follow the recorded closure disposition. If the bank reports the same reversal again, confirm the underlying movement with Finance before changing the case balance or closure status. For an already recorded reversal on a second statement, verify the bank movement and retain both receipt references with the first reversal. If a later statement reports a different reversal amount for the same instruction, use Resolve a reversal amount discrepancy and refer the bank evidence to Finance.
Published version 10 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Review the reversal escalation · Programme management · all
NSIPA local workflow
Provisional guidance
Review the reversal with the Finance reconciliation summary and Audit evidence.
What to do
- Confirm the affected payment references and the outcome established by Finance.
- Review the proposed response through the organisation’s authorised decision or escalation process.
- Record the resulting direction in the approved process with the supporting evidence.
What you need
Refresh or download the envelope report when reviewing the escalation. The existing approval history identifies the submitted revision.
Next step
Any corrective payment requires a separate authorised decision and the applicable review process. If this is a corrective payment that has also reversed, review Finance and Audit evidence for both payments and record the escalation decision through the authorised process. The prior approval applies only to the submitted corrective list. To authorise another payment, record the scope and amount of the new authorisation in the authorised case process. To close the case, record the closure decision and reason with the final reconciliation and Audit evidence. Approve and save applies to the current PBMS list revision. If a reversal is recorded after case closure, review the updated Finance and Audit evidence and record the reopening decision, reason and assigned follow-up through the authorised case process. A further payment requires its own authorised decision and approvals. If another payment is warranted after reopening, record a separate payment authorisation with its amount, scope and reason in the authorised case process. The new list then needs its own Finance, Audit and CEO approvals. If that newly authorised payment also reverses, review the new exception under the reopened case and record the next disposition. Any further payment requires its own authorisation and approvals. To close the reopened case, use the updated Finance reconciliation and Audit evidence to record the new closure decision and reason under the same case reference. Include the date and disposition. If the bank reports a possible duplicate after closure, keep the existing closure if Finance confirms the duplicate. Review any new movement or unresolved difference through the authorised case process. If Finance confirms that the later statement shows a different amount, review the unresolved amount before deciding whether to reopen. Record the disposition under the existing case reference.
Published version 9 · public guidanceOpen this guide · Download plain text
Was this guide helpful?