Ask the local knowledge assistant
NSIPA knowledge library
Task guidance for each service and workflow stage. Local guides describe NSIPA; upstream references may describe other releases. Your account determines available actions.
531 published entries across 18 services · 64 source-linked guides
37 matching entries · Page 2 of 4
From programme setup to payment reconciliation · Programme management · all
NSIPA local workflow
Provisional guidance
Follow the installed PBMS workflow from programme configuration through list approval, payment and reconciliation.
What to do
- Programme Admin configures the source registry, eligibility rule, benefit and enrolment and disbursement cycles. Use the authorised programme rules and review the calculated list.
- Payment submits the list to Finance. Finance, Audit and CEO decide in order. Programme Admin corrects a returned list and Payment resubmits it as a new revision for review.
- After final approval, Programme Admin can export the fully verified list and configures the approved sponsor bank route when needed. The assigned Payment role confirms the verified count, amount and revision before submitting the payment.
- Open View payment progress. Use the batch report to check dispatch and the envelope report to check reconciliation and reversals. Bridge exchanges and tracks payment instructions and reconciliation evidence between PBMS and the bank.
- Refer a failed, incomplete or reversed payment through the authorised reconciliation process. Retain the submitted list, envelope, batch and bank statement references for review.
What you need
Use the approved programme rules and the assigned roles. Eligibility, authorisation limits, sponsor bank controls and reconciliation rules require the applicable approved sources.
Next step
Record the verified outcome against the existing payment references. Refer unresolved differences through the authorised process before closing the reconciliation.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Programme setup · Programme management · all
Provisional guidance
Configure a programme and its enrollment, verification and benefit settings.
What to do
- Open the programme and check its identifier and target registry.
- Review enrollment settings, verification requirements and linked benefits.
- Save authorised changes and confirm the displayed configuration before starting processing.
What you need
The information requested by the screen and an authorised account.
Next step
Confirm the resulting status or saved information before continuing to the next task described on this screen.
Common issues
Resolve displayed validation errors. If access is denied, contact an authorised administrator.
Published version 3 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Gender Types · Beneficiary programme administration · all
NSIPA local workflow
Provisional guidance
Maintain the gender types reference values used by registry or programme records.
What to do
- Search for an existing value before adding a duplicate.
- Check its label, code and related or parent records before editing.
- Save only an authorised correction and confirm that dependent record selections still show the intended value.
What you need
An account with permission for this screen and the correct record or configuration reference.
Next step
Confirm the resulting values or status in the related record before continuing with the next authorised task.
Common issues
Check filters, required fields and related records if an entry is missing or cannot be saved. Do not delete a referenced value or repeat a processing action to bypass an error. Contact the administrator with the record reference and displayed message if the issue remains.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Group Membership Kind · Beneficiary programme administration · all
NSIPA local workflow
Provisional guidance
Maintain the group membership kind reference values used by registry or programme records.
What to do
- Search for an existing value before adding a duplicate.
- Check its label, code and related or parent records before editing.
- Save only an authorised correction and confirm that dependent record selections still show the intended value.
What you need
An account with permission for this screen and the correct record or configuration reference.
Next step
Confirm the resulting values or status in the related record before continuing with the next authorised task.
Common issues
Check filters, required fields and related records if an entry is missing or cannot be saved. Do not delete a referenced value or repeat a processing action to bypass an error. Contact the administrator with the record reference and displayed message if the issue remains.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Group types · Beneficiary programme administration · all
NSIPA local workflow
Provisional guidance
Maintain the group types reference values used by registry or programme records.
What to do
- Search for an existing value before adding a duplicate.
- Check its label, code and related or parent records before editing.
- Save only an authorised correction and confirm that dependent record selections still show the intended value.
What you need
An account with permission for this screen and the correct record or configuration reference.
Next step
Confirm the resulting values or status in the related record before continuing with the next authorised task.
Common issues
Check filters, required fields and related records if an entry is missing or cannot be saved. Do not delete a referenced value or repeat a processing action to bypass an error. Contact the administrator with the record reference and displayed message if the issue remains.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Groups · Beneficiary programme administration · all
NSIPA local workflow
Provisional guidance
Review the groups recorded in this registry.
What to do
- Find the intended person or household using the available search and filters.
- Open the record and check its identifying details, household links and supporting information.
- Use permitted edits only for evidenced corrections and confirm the saved values or required review status.
What you need
An account with permission for this screen and the correct record or configuration reference.
Next step
Confirm the resulting values or status in the related record before continuing with the next authorised task.
Common issues
Check filters, required fields and related records if an entry is missing or cannot be saved. Do not delete a referenced value or repeat a processing action to bypass an error. Contact the administrator with the record reference and displayed message if the issue remains.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
ID Types · Beneficiary programme administration · all
NSIPA local workflow
Provisional guidance
Maintain the id types reference values used by registry or programme records.
What to do
- Search for an existing value before adding a duplicate.
- Check its label, code and related or parent records before editing.
- Save only an authorised correction and confirm that dependent record selections still show the intended value.
What you need
An account with permission for this screen and the correct record or configuration reference.
Next step
Confirm the resulting values or status in the related record before continuing with the next authorised task.
Common issues
Check filters, required fields and related records if an entry is missing or cannot be saved. Do not delete a referenced value or repeat a processing action to bypass an error. Contact the administrator with the record reference and displayed message if the issue remains.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Individuals · Beneficiary programme administration · all
NSIPA local workflow
Provisional guidance
Review the individuals recorded in this registry.
What to do
- Find the intended person or household using the available search and filters.
- Open the record and check its identifying details, household links and supporting information.
- Use permitted edits only for evidenced corrections and confirm the saved values or required review status.
What you need
An account with permission for this screen and the correct record or configuration reference.
Next step
Confirm the resulting values or status in the related record before continuing with the next authorised task.
Common issues
Check filters, required fields and related records if an entry is missing or cannot be saved. Do not delete a referenced value or repeat a processing action to bypass an error. Contact the administrator with the record reference and displayed message if the issue remains.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Payment Batch Tags · Beneficiary programme administration · all
NSIPA local workflow
Provisional guidance
Maintain the payment batch tags reference values used by registry or programme records.
What to do
- Search for an existing value before adding a duplicate.
- Check its label, code and related or parent records before editing.
- Save only an authorised correction and confirm that dependent record selections still show the intended value.
What you need
An account with permission for this screen and the correct record or configuration reference.
Next step
Confirm the resulting values or status in the related record before continuing with the next authorised task.
Common issues
Check filters, required fields and related records if an entry is missing or cannot be saved. Do not delete a referenced value or repeat a processing action to bypass an error. Contact the administrator with the record reference and displayed message if the issue remains.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Registrant Tags · Beneficiary programme administration · all
NSIPA local workflow
Provisional guidance
Maintain the registrant tags reference values used by registry or programme records.
What to do
- Search for an existing value before adding a duplicate.
- Check its label, code and related or parent records before editing.
- Save only an authorised correction and confirm that dependent record selections still show the intended value.
What you need
An account with permission for this screen and the correct record or configuration reference.
Next step
Confirm the resulting values or status in the related record before continuing with the next authorised task.
Common issues
Check filters, required fields and related records if an entry is missing or cannot be saved. Do not delete a referenced value or repeat a processing action to bypass an error. Contact the administrator with the record reference and displayed message if the issue remains.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Relationships · Beneficiary programme administration · all
NSIPA local workflow
Provisional guidance
Maintain the relationships reference values used by registry or programme records.
What to do
- Search for an existing value before adding a duplicate.
- Check its label, code and related or parent records before editing.
- Save only an authorised correction and confirm that dependent record selections still show the intended value.
What you need
An account with permission for this screen and the correct record or configuration reference.
Next step
Confirm the resulting values or status in the related record before continuing with the next authorised task.
Common issues
Check filters, required fields and related records if an entry is missing or cannot be saved. Do not delete a referenced value or repeat a processing action to bypass an error. Contact the administrator with the record reference and displayed message if the issue remains.
Published version 2 · public guidanceOpen this guide · Download plain text
Was this guide helpful?
Data Imports administration · Master Beneficiary Registry · all
NSIPA local workflow
Provisional guidance
Monitor batches and manage versioned source mappings.
What to do
- Use Transfers to inspect batch status and receipts.
- Use Sources and mappings to review the active source configuration.
- Open Access to check which Registry roles can operate the module.
What you need
An administrator needs native intake edit permission to transfer approved files.
Next step
Check the source and mapping version recorded on a batch when investigating a transfer.
Published version 1 · public guidanceOpen this guide · Download plain text
Was this guide helpful?