Open Master Beneficiary Registry workspace ↗Skip to main content
NSIPA — National Social Investment Programmes AgencyNSIPA
Registration & enrollment
SYNTHETIC SANDBOX • Use fictional people and households. This service does not verify NIN or issue real payments.

Ask the local knowledge assistant

NSIPA knowledge library

Task guidance for each service and workflow stage. Local guides describe NSIPA; upstream references may describe other releases. Your account determines available actions.

534 published entries across 18 services · 64 source-linked guides

Persona workspace

464 matching entries · Page 14 of 39

Monthly disbursement cycles · Programme management · all

NSIPA local workflow

Provisional guidance

Create or inspect a disbursement cycle linked to approved enrollment.

What to do

  1. Select the approved enrollment cycle and enter the approved schedule.
  2. Create the disbursement cycle and queue its list if authorised.
  3. Wait for calculation to complete before starting approval.

What you need

Confirm the programme and cycle name.

Next step

Follow processing status in Enrolment and disbursement lists.

Published version 1 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Monthly enrolment cycles · Programme management · all

NSIPA local workflow

Provisional guidance

Create or inspect the monthly enrollment cycle and list.

What to do

  1. Check the approved registration and disbursement dates.
  2. Create the enrollment cycle if authorised.
  3. After registration closes, create the enrollment list and check processing.

What you need

Confirm the intended programme and dates.

Next step

Use the approved enrollment cycle when configuring disbursement.

Published version 1 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Payment status report · Programme management · all

NSIPA local workflow

Provisional guidance

Read the payment processing and settlement evidence for the selected batch.

What to do

  1. Confirm the list and batch reference.
  2. Use Refresh report for the latest Bridge response.
  3. Read dispatch and settlement fields separately, then review any error or pending message.

What you need

Use the available bank or reconciliation evidence for final settlement status.

Next step

Escalate incomplete or inconsistent results with the reference and observed state.

Published version 2 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Payments · Programme management · all

NSIPA local workflow

Provisional guidance

Track payment instructions from envelope and batch creation to the returned payment report.

What to do

  1. Open a disbursement list and inspect its envelope and batch creation status.
  2. Open the Payments tab and select the required envelope or batch report.
  3. Review dispatch and reconciliation separately. Submission to Bridge is not confirmation of bank settlement.

What you need

An authorised PBMS staff account and the correct programme or record reference. Available actions depend on your assigned permissions.

Next step

Confirm the status or saved values shown by PBMS before continuing. For payment reports, confirm the returned settlement state separately from dispatch.

Common issues

If data is missing, check the current filters and programme selection, then refresh. Resolve displayed validation errors before retrying. If access is denied or processing remains failed, contact the PBMS administrator with the record reference and error message.

Published version 2 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Payments and reconciliation · Programme management · all

NSIPA local workflow

Provisional guidance

Follow disbursement instructions, dispatch and settlement evidence.

What to do

  1. Open the payment entry for the correct programme and disbursement list.
  2. Check the envelope and batch status and refresh available payment reports.
  3. Review bank settlement or reconciliation evidence separately from dispatch status.

What you need

Use the list reference when investigating a failure or mismatch.

Next step

A dispatch or Bridge acknowledgement confirms processing at that step. Check settlement separately.

Published version 1 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Preserve evidence of the reversal count discrepancy · Programme management · all

NSIPA local workflow

Provisional guidance

Preserve the original reversal evidence and the later report with the discrepancy.

What to do

  1. Keep both statement references, the original closure and the latest report. Trace each entry to the instruction, approved revision, envelope and batch. Review the Finance conclusion and document the evidence for any unresolved difference.

What you need

Keep the original approval and closure history with the evidence for the late statement.

Next step

Refer an unresolved difference to the authorised decision owner for a documented disposition.

Published version 1 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Priority rules · Programme management · all

NSIPA local workflow

Provisional guidance

Review the configured priority rules for processing lists.

What to do

  1. Open the relevant rule and review its conditions before any authorised change.

What you need

Use the approved prioritisation policy for the programme.

Next step

Inspect the resulting list ordering in a controlled case.

Published version 2 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Process a further payment after two reversals · Programme management · all

NSIPA local workflow

Provisional guidance

Use this route when the authorised case decision permits a further disbursement after the original and corrective payments both reversed.

What to do

  1. CEO records the decision, reason, scope and amount under the authorised case process. Keep the decision reference with the case reference, Finance reconciliation and Audit evidence.
  2. Programme Admin prepares a separate disbursement list for the authorised programme and cycle. Link its revision to the decision and both reversed payment records. Use the approved sponsor bank route.
  3. Payment uses Initiate approval and includes the escalation decision reference. Finance validates the authorised amount and both reversals. Audit checks the links and prior approval history. CEO records final list approval in PBMS.
  4. Once this separate list shows Fully verified and routing is ready, Payment uses Proceed to payments and checks the count, amount and revision before choosing Confirm and proceed.
  5. Finance and Audit track the new envelope and batch independently. Record their references and final reconciliation in the existing case alongside both reversed payments.

What you need

Use the authorised case reference, CEO decision reference, both earlier lists and bank reconciliation evidence. Preserve both submitted lists under their existing payment references.

Next step

Follow the new payment to reconciliation and update the case with its outcome. Route a further exception through the authorised case process. If the new payment reverses after case closure, follow Reopen a closed case after a late reversal and hold any further submissions pending an authorised decision.

Published version 2 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Process an authorised corrective payment · Programme management · all

NSIPA local workflow

Provisional guidance

Follow the approved corrective decision while keeping the original reversal and any new PBMS payment traceable.

What to do

  1. Confirm the authorised decision and its case reference, affected instruction and approved amount. Keep the original list revision, envelope, batch and reversal evidence on the case.
  2. If the authorised procedure calls for a PBMS disbursement, Programme Admin prepares a separate list in the authorised programme and cycle. Record the link to the original reversal using the approved case record or available reference fields.
  3. Payment initiates approval of the separate list. Finance checks the amount and reversal evidence, Audit checks the approval trail and references, and CEO records the final list decision under the configured workflow.
  4. Once the separate list is Fully verified and routing is configured, Payment reviews its beneficiary count, total and revision in the confirmation and submits it through the normal payment action.
  5. Finance and Audit compare the new envelope and batch with the corrective approval and reconcile the new instruction separately. Keep both sets of references. Escalate a further reversal through the authorised process.

What you need

An authorised corrective decision and its supporting evidence are required. PBMS keeps the original submitted list available for review and uses its regular approval flow for the separate list.

Next step

Record the new dispatch and reconciliation outcome in the corrective case while retaining the original reversal evidence. If the corrective payment is reversed, follow the escalation guidance for a reversed corrective payment and hold further payment attempts pending an authorised decision.

Published version 2 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Process an authorised payment after case reopening · Programme management · all

NSIPA local workflow

Provisional guidance

Use this workflow when the CEO records a separate payment authorisation after a reversal case is reopened. Keep the reopening and payment decisions under the existing case reference.

What to do

  1. CEO records the new payment decision, scope, amount and reason through the authorised case process. Reopening restores case follow-up. A separate authorisation is required for a new payment.
  2. Programme Admin prepares a separate disbursement list in the authorised programme and cycle. Link the new list to the case reference, reopening decision, new authorisation and each earlier payment and reversal. Configure the approved sponsor bank route.
  3. Payment initiates approval of the new list with the case and decision references. Finance verifies the net balance and authorised amount. Audit traces the decisions and earlier payment records. CEO records final approval of the new list revision.
  4. After the new list shows Fully verified and routing is ready, Payment compares the beneficiary count, amount and revision with the authorisation. Use Proceed to payments and Confirm and proceed for that approved list.
  5. Finance matches the new instruction to its bank statement entry. Audit preserves the new envelope, batch and reconciliation outcome alongside the earlier payment records and the closure, reopening and authorisation decisions.

What you need

Use a reopened case reference, a dated reopening decision, a separate payment authorisation, the updated reconciliation, and the prior approval and reversal evidence.

Next step

Record the new reconciliation outcome in the existing case. Use the authorised case process for any subsequent exception or closure decision. If the statement records another reversal while the case is reopened, keep the case active during review. Payment holds further attempts. Finance matches the debit and reversal, verifies the amount and reason, and updates the case balance. Audit retains the new approval and reversal trail. CEO reviews the new exception and records the disposition through the authorised case process. If the CEO decides to close the reopened case, follow Close a case after payment reversals and retain the earlier closure, reopening and payment authorisation.

Published version 3 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Programme analytics · Programme management · all

NSIPA local workflow

Provisional guidance

Review programme-level metrics and trends.

What to do

  1. Select the intended programme and reporting filters.
  2. Read the count, geography and time context before comparing results.
  3. Confirm whether metrics describe enrollment, approval or payments.

What you need

Check the period and programme selection when comparing totals.

Next step

Open the underlying programme cycles or lists to investigate specific workflow counts.

Published version 1 · public guidance

Open this guide · Download plain text

Was this guide helpful?

Programme approval flow · Programme management · all

NSIPA local workflow

Provisional guidance

Follow the setup, cycles, lists and staff access for a programme using sequential approval.

What to do

  1. Select the intended programme and open the relevant tab.
  2. Use Lists to open a calculated disbursement list and check its revision.
  3. Use the current state and your account role to find the next action.

What you need

The pilot flow routes approvals sequentially through Finance, Audit and CEO.

Next step

Check the programme name and stage before opening another tab.

Published version 1 · public guidance

Open this guide · Download plain text

Was this guide helpful?